The roll forming process of the glazed tile roll forming machine involves sequentially arranged multi-pass forming rollers to continuously bend metal sheets and strips laterally to create profiles with specific cross-sections. Roll forming is suitable for producing large batches of long workpieces with uniform cross-sections, especially advantageous for products with annual production volumes of millions of pieces, offering considerable economic benefits. It can also be combined with various other processes to form a continuous production line.
The glazed tile roll forming machine uses a motor, frequency converter, and high-hardness pressure rollers, with mechanically adjustable gaps via inclined blocks. It is used for electrode roll forming. It features low energy consumption, high efficiency, safe and simple operation, and convenient maintenance. It consists of a feeding section, roll forming section, safety protection devices, and related electrical components. The entire machine is driven by a motor; the main control components include start/stop buttons, forward/reverse adjustment, speed adjustment, and indicator lights.
The operation of the glazed tile roll forming machine is similar to that of a double-drive roll press. To a certain extent, one roller is fixed, and the other is a moving roller. The two rollers operate at the same speed and are completely synchronized, rotating relative to each other. Material is fed in from the top and crushed under high pressure in the gap between the two rollers.
The glazed tile roll forming machine relies primarily on the fixed roller for power transmission, resulting in low power consumption. The moving roller's movement is transmitted from the fixed roller via a toothed system, achieving complete synchronization. This solves the problem of severe wear caused by sliding compression of the rollers. The pressure regulating system uses a combination spring, resulting in a low failure rate. The output particle size can reach over 30% for fine powder <0.08mm and over 80% for material <2mm. Furthermore, all extruded material particles exhibit numerous cracks, significantly increasing the specific surface area. This greatly improves the grinding performance of the subsequent ball mill system, thereby significantly reducing the power consumption per unit output of the grinding system, achieving energy saving and emission reduction effects, and greatly increasing economic benefits.






