When selecting a double-layer glazed tile roll forming machine, first pay attention to the diameter of its three top rollers: they must be compatible with the type of steel to be cold-bent. Smaller roller diameters result in a smaller contact area, making slippage during processing easier and causing deformation when bending non-standard steel. Secondly, consider the diameter and stroke of the hydraulic cylinder: these are based on the output pressure of the hydraulic cylinder and the radius of the steel being processed.
The thickness of the machine's platform steel plate and the quality of its frame are also important, requiring sufficient load-bearing capacity and machine strength. Additionally, the motor power and reducer quality must meet specific requirements.
During operation, use hydraulic oil of the same brand as the system, with an oil temperature between 45 and 80°C. Use a high flow rate to remove impurities from the system. The hydraulic system should be cleaned at least three times. After each cleaning of the double-layer glazed tile roll forming machine, drain all the oil from the system while it is still hot.
After cleaning, clean the filter, replace the filter element, and then add new oil. Select the appropriate drive method for the oil pump of the double-layer glazed tile roll forming machine from among electric, pneumatic, and gasoline engine options, and understand its capacity. Based on the working environment, consider the operating temperature of the oil pump and the cooling conditions of the roll forming machine to determine if explosion-proof measures are necessary.
