The Leveling Cutting Machine is used for coil-to-sheet processing before roll forming, stamping, bending, or other sheet metal production. It can level metal plates through roller pressing and complete automatic cutting after the required length and batch quantity are set on the PLC touch screen. It is suitable for color-coated steel sheets, aluminum sheets, galvanized sheets, stainless steel sheets, iron plates, and other metal sheet materials. With CNC input, automatic shearing, batch setting, and counting functions, the machine helps prepare flat sheets for later processing without manual plate cutting.





Specifications
|
Item |
Content |
Remarks |
|
Material |
Galvanized color plate |
|
|
Width |
1000mm-1250mm |
Customized special sizes available |
|
Thickness |
0.3mm-0.6mm |
|
|
Color Matching |
Green vertical grain |
Can also be customized according to customer requirements |
|
Overall Dimensions (approx.) |
2000mm×1600mm×1500mm |
|
|
Forming Rows |
3+4 |
|
|
Forming Roller Shaft |
Diameter 70mm, precision machined 45# steel |
|
|
Wall Panels on Both Sides |
16mm |
|
|
Frame Specification |
300H steel |
|
|
Motor Power |
Hydraulic transmission 3KW |
Voltage can be customized 380/220/240 |
|
Transmission Mode |
Chain |
1 inch |
|
Forming Speed |
8/12m/min |
|
|
Cutting Mode |
Hydraulic forming then cutting, hydraulic guide cutting |
|
|
Cutter Material |
Cr12 heat treatment |
Thickened, high wear-resistant cutter plate |
|
Electronic Control System |
Including PLC, touch screen, coding counter |
Fully automatic batch setting |
Product Advantages
Combined Coil-to-Sheet Route
The Leveling Cutting Machine arranges uncoiling, leveling, length counting, and hydraulic shearing in one line.
Batch Settings
The PLC and touch screen support sheet length and order quantity input, reducing repeated manual cutting setup.
Roller Support
The listed 3+4 roller arrangement and 70 mm shafts are used to level common galvanized color plate before shearing.
Speed and Power Match
The 3 kW hydraulic transmission and 8/12 m/min line speed are reviewed with the material thickness before the trial.
Applications
1. Building Materials Processing: The Leveling Cutting Machine used for leveling and shearing color steel plates and stainless steel plates in the production of roof panels, wall panels, and structural components.
2. Stamping & Hardware Manufacturing: Applied in processing metal sheets into flat blanks for stamping parts, hardware components, and other products.
3. Metal Fabrication: Utilized for leveling and shearing iron plates and metal sheets for various metal fabrication applications.
Quality Control
Coil Check
Confirm width, thickness, material grade, inner coil condition, and coating side before feeding.
01
Leveling Trial
Adjust roller pressure gradually and check sheet flatness without leaving pressure marks on the surface.
02
Length Test
Compare programmed sheet length with measured length over repeated cuts from the coding counter.
03
Cut-Edge Check
Inspect squareness, burr, corner deformation, cutter sequence, and hydraulic guide movement.
04
Control Check
Record PLC batch count, touch-screen setting, emergency stop, voltage, grounding, and repeated automatic operation.
05
FAQ
Q: What information is required for the Leveling Cutting Machine?
A: Provide coil material, width, thickness, sheet length, production batch size, voltage, and receiving method.
Q: What does the leveling section do?
A: It uses multiple rollers to reduce coil set before cutting, so the output sheet is closer to the required flatness for later processing.
Q: What should be measured during the trial run?
A: Check flatness, length repeatability, squareness, burr, surface marks, hydraulic cutting sequence, and batch count.
Hot Tags: leveling cutting machine, China leveling cutting machine manufacturers, suppliers, factory, Aluminum Sheet Metal Decoiler, Leveling Slitting Production Line, motorized decoiler, metal roofing sheet edge folding machine, Roof Panel Edge Folding Machine, Leveling Cutting Machine










