An Acoustic Louver Making Machine is a roll forming line that turns flat coil into finished, punched, cut-to-length blades for acoustic louvers in one continuous run - decoiling, levelling, in-line punching of the acoustic holes, roll forming to the blade profile, metre counting and cut-to-length, all driven from a PLC touch screen by a single operator. Unlike a standard roll former built for long roofing or wall panels, this line is engineered around a short, functional blade: the hole pattern feeds the sound-absorbing infill, the blade angle and pitch decide how much air passes and how much noise is stopped, and every piece is cut to a tight, repeatable length, because a degree off on the angle and the louver either whistles or throttles the airflow.
Configuration & Process
The process runs in one pass:
Decoiling → Levelling → Inline punching → Roll forming → Metre counting → Cut-to-length → Collection
|
Item |
What it means for your order |
|
Blade profile |
Built to your drawing or a sample blade |
|
Material |
GI, PPGI, aluminium; thickness per your spec |
|
Punching |
Inline station; hole pattern follows your acoustic design |
|
Cutting |
Computerized meter counting, cut to your set length |
|
Control |
PLC + touch screen: length setting, output count, fault alarm |
|
Rollers & frame |
Precision-machined rollers on a reinforced stand |
|
Automation |
Configurable - from straightforward running to a fully automated line with stacking |
|
Collection |
Manual table or automatic stacker, as specified |
Two details tend to decide whether a line stays accurate after a year of production: how the rollers are machined, and whether the frame is heavy enough not to shift under load. We do not cut corners on either. The PLC handles length setting, output counting and fault alerts, so one operator can run the line without watching every metre by eye.

Applications & Materials
If you are supplying a factory workshop, a cooling tower intake, a compressor house or a generator station, you already know the problem - the ventilation opening has to move real air, and it must not become a noise source for the people nearby. A correctly formed louver solves both. The blades keep the airflow path open while the perforation and the absorbing medium behind them take the edge off the sound.
The line runs the sheet metals the industry actually specifies -galvanized steel, pre-painted steel and aluminium - with the gauge following your specification rather than a fixed machine limit. What comes off the end is the blade itself. Where customers need a complete assembly, we can work the matching frame and fixing details into the tooling discussion too.
This is a fit if your output is acoustic louver blades for ventilation and noise-control work.
Customization & Manufacturing Capability
Send a profile drawing, or even a photo of a blade you are trying to match, and the tooling gets built around it. Blade angle, depth, pitch, material thickness, coil width, the level of automation and the way finished blades are collected are all open for discussion before anything is built.
Every Acoustic Louver Making Machine is engineered around the blade you send us - and the people doing that engineering are the same people who build it.
Before a machine leaves the workshop, it is test-run with real coil. It is a simple check and it catches most problems - a blade that comes out scratched, a hole pattern that drifts, a cut length that creeps.
Why Choose Shengda

We are the manufacturer, not a middleman. Our people have spent years in cold-bending machinery, and Botou's supply chain lets us source and machine components without long waits.
The machines are already in the field. Shengda lines have gone to more than fifty countries across Southeast Asia, the Middle East, Africa, South America and Eastern Europe, serving both a strong domestic base and an export market. Customer satisfaction has stayed above 98%, and the company has been recognised with titles such as "Quality Roll Forming Machine Supplier" and "Integrity Enterprise" from industry bodies.
And we stay after delivery. Installation, commissioning, operator training, maintenance and technical consulting are part of the deal, with spare-parts support when production ramps up. The enquiries we value most are the ones that come back for a second line - that is the only proof of a supplier we really trust.
FAQ
Q: Can the acoustic holes be punched in-line?
A: Yes. A punching station sits ahead of the forming section, so the perforation for the sound-absorbing infill is made in the same pass - no separate operation.
Q: How does an Acoustic Louver Making Machine control the length of the panels?
A: The PLC counts metres as the strip advances and triggers the cut at the length you set, keeping short blades consistent from the first piece to the last.
Q: Are you a manufacturer or a trading company?
A: A direct manufacturer. Our plant is in Botou, Hebei, and the same team handles design, production and after-sales.
Hot Tags: acoustic louver making machine, China acoustic louver making machine manufacturers, suppliers, factory, auxiliary equipment, Leveling Cutting Machine, Leveling Slitting Production Line, metal roof panel edge folding machine, Stainless Steel Metal Sheet Plate Cutting Machine, stainless steel slitting machine









