Corrugated Roof Roll Forming Machine

Corrugated Roof Roll Forming Machine

Product Type:Fully Automatic
Customization Support:Yes
Send Inquiry
Description
Technical Parameters

Corrugated Roof Roll Forming Machine is a device that continuously cold-bends metal coils such as color-coated steel sheets and galvanized sheets through multiple sets of rollers, producing roof tiles with corrugated or trapezoidal sections. It is suitable for the roof enclosure systems of various steel structure buildings.

 

1001
2001
3001
4001
5001

 

Specifications

 

Item

Content

Remarks

Material

Galvanized color plate

 

Width

1000mm-1250mm

Customized special sizes available

Thickness

0.3mm-0.6mm

 

Color Matching

Green vertical grain

Can also be customized according to customer requirements

Overall Dimensions (approx.)

6000mm×1300mm×1500mm

 

Forming Rows

13 rows

 

Forming Roller

Precision machined 45# steel, surface hardened chrome-plated and polished

 

Forming Roller Shaft

Diameter 70mm, precision machined 45# steel

 

Wall Panels on Both Sides

16mm

 

Frame Specification

300H steel

 

Motor Power

3KW

Voltage can be customized 380/220/240

Transmission Mode

Chain

1 inch

Forming Speed

8/12m/min

 

Cutting Mode

Hydraulic forming then cutting, hydraulic guide cutting

 

Cutter Material

Cr12 heat treatment

Thickened, high wear-resistant cutter plate

Electronic Control System

Including PLC, touch screen, coding counter

Fully automatic batch setting

 

1

 

Product Features

Compatible with Multiple Tile Profiles
By swapping rollers or adjusting forming parameters, the machine can produce roofing tiles with various cross-sections-such as curved or trapezoidal profiles-to suit diverse roof slopes and architectural designs. Profile changes can typically be completed within 30 to 60 minutes.
Automatic Fixed-Length Cutting
The machine is equipped with a length measuring device and a hydraulic cutting system. When the preset length is reached, the material is cut automatically - no manual measuring or marking is required. Cutting length accuracy is maintained within ±1.5 mm, resulting in clean, burr-free edges.
Durable Components
Forming rollers undergo high-frequency quenching, achieving a surface hardness of HRC55–60 and excellent wear resistance. Under normal operating conditions, the rollers have a service life of over three years; routine maintenance requires only cleaning and lubrication.

 

Applications

 

  • Industrial Factories and Warehouses:Corrugated Roof Roll Forming Machine is used for roof and wall enclosure of large-span steel structure factories.
  • Logistics Centers and Market Sheds:Corrugated Roof Roll Forming Machine is suitable for the construction of large-area shed roofs.
  • Agricultural Breeding Houses:It is also used for roof covering of livestock and poultry breeding houses.

 

Operational Precautions

 

1.Before startup, check the oil levels at all lubrication points-including bearings, chains, and gearboxes-and replenish oil promptly if levels are low.

2.During production, monitor the sheet material for tracking deviations (a deviation of ≤±1mm is considered normal); adjust the side guide rollers immediately if misalignment occurs.

3.Maintain stable hydraulic system pressure; if pressure fluctuations exceed ±0.5MPa, inspect the hydraulic oil filter element or pipelines for blockages.

4.Inspect the cutting blades for edge wear every 20,000 to 30,000 meters of production; replace or regrind the blades promptly if burrs or slanted cuts appear.

5.If the machine is shut down for more than 4 hours, disconnect the main power supply and clean any residual dust or oil from the roller surfaces.

6.When changing specifications, save the new parameters before loading them, and verify that the values on the display screen match the actual parameters before starting the machine.

 

Supply Capability

 

Leveraging the mature local machinery manufacturing ecosystem in Botou, we benefit from short lead times for raw materials and outsourced components, ensuring production is not delayed by supply chain issues. Core components-such as rollers, frames, and main shafts-are manufactured in-house, allowing for flexible and controllable production scheduling. Standard equipment ships 20 to 30 days after drawing confirmation and deposit receipt; custom orders typically take no more than 40 days, with expedited options available for urgent requests. Monthly production capacity is approximately 10 to 15 units, allowing us to handle multiple orders simultaneously. Our products are exported to over 50 countries; our export packaging and container loading procedures are standardized to ensure suitability for long-distance ocean transport.

11
12
13
FAQ

Q: How much training is required to operate the Corrugated Roof Roll Forming Machine?

A: Standard operators can work independently after just 1–2 days of training. We provide bilingual (Chinese and English) control panel labels and concise operation instruction cards affixed to the machine for easy reference.

Q: Is the machine noisy during operation? Is special protection required?

A: During normal operation, the noise level is approximately 75–80 decibels-comparable to a standard workshop environment-so no special noise reduction measures are needed. We recommend that operators wear earplugs or earmuffs as standard workplace safety protection.

Q: Do you sell roller dies or spare parts separately, in addition to the complete machine?

A: Yes, we do. We supply roller dies, cutting blades, punching dies, hydraulic seals, encoders, and various wear parts. These are designed for our own machines and can also be used on other brands' equipment following a compatibility assessment.

 

 

Hot Tags: corrugated roof roll forming machine, China corrugated roof roll forming machine manufacturers, suppliers, factory, corrugated sheet roll forming machine, corrugated metal roofing machine, corrugated iron roofing sheet making machine, Corrugated Roof Roll Forming Machine, Corrugated Roof Sheet Machine, corrugated roof sheet making machine